Sales Follow-Up Email Templates: 9 Copy-Paste Templates (and When to Send Each)

If you run a 5-to-30-person B2B sales team working from Gmail or Outlook, the nine templates below cover every situation where deals typically stall: no reply after first outreach, silence after a proposal, a demo that went well then went quiet, a meeting no-show, a cold deal you want to revive, and the breakup. All are short. None start with "just bumping this."

The harder part is not the words. It is knowing which of your 30 or 40 open threads needs a follow-up today and which ones are already waiting on a reply from you. That problem is covered at the end, after the templates.

The 9 Situations Where Follow-Ups Fall Through

Before the templates: a note on length. The best B2B follow-ups are three to five sentences. The prospect knows who you are. They do not need a recap. They need a low-friction reason to reply. Every template below is built on that principle.

1. No Response After First Outreach

When to send: 2 business days after your initial email.

Subject: Re: [original subject]

Hi [Name],

I sent this over on [day] and wanted to make sure it landed. The short version: [one sentence on what you do and why it is relevant to their business].

Worth a 15-minute call this week? I have [day] or [day] free.

[Your name]

One sentence on relevance. One specific ask. No "I hope this email finds you well."

2. No Response After Second Touch

When to send: 5 business days after Template 1 with no reply.

Subject: Re: [original subject]

Hi [Name],

Following up once more. We work with [type of company] to [specific outcome]. If that is relevant, I would value 15 minutes. If the timing is off, I am happy to reconnect in a few months.

Either way, what works best?

[Your name]

The "either way" framing and the easy out ("a few months") get replies from both directions. It signals you are not desperate and you have other conversations happening.

3. After Sending a Proposal (Day 2 Check-In)

When to send: 2 business days after sending the proposal.

Subject: Re: Proposal for [Company]

Hi [Name],

Just confirming you received this. Happy to walk through any part of it on a call, or answer questions by email if that is easier.

Any questions so far?

[Your name]

Short and service-oriented. This is not chasing. It is confirming they have what they need to move forward.

4. After a Proposal, Silence at Day 7-10

When to send: 7 to 10 days after the proposal with no response to Template 3.

Subject: Re: Proposal for [Company]

Hi [Name],

Checking in on the proposal. These often sit while other priorities take over, which I completely understand.

Is there a particular concern I can address, or has the timeline shifted?

[Your name]

"Has the timeline shifted?" is the most useful question at this stage. Prospects who are still interested often have an internal blocker. This surfaces it without pressure.

5. After a Demo (Next-Step Follow-Up)

When to send: within 24 hours of the demo.

Subject: Next steps from today's call

Hi [Name],

Thanks for the time today. Based on what you described, the clearest next step is [specific action: a trial, a second call with [name], reviewing the proposal].

I will send over [any materials discussed] by [day]. Does [specific date] work for a follow-up call?

[Your name]

Specificity is what makes this one land. "Let me know what you think" is not a next step. Name the action and name the date.

6. After a Meeting No-Show

When to send: within 2 hours of the missed meeting.

Subject: Missed connection

Hi [Name],

We had time scheduled for [time] today. Easy for something to come up. Happy to reschedule.

Here is my calendar: [link]. Pick a slot that works for you.

[Your name]

No guilt-tripping. No "I noticed you missed our call." One offer to reschedule with a direct link. If they do not rebook, follow up once five days later with the original proposal or demo request.

7. Re-Engaging a Gone-Quiet Deal (60 or More Days of Silence)

When to send: when a previously warm deal has had no activity for 60 days or more.

Subject: [Company] -- checking in

Hi [Name],

It has been a while since we last connected. I know priorities shift.

I wanted to reach out because [specific reason: a result from a similar company, a new feature relevant to what they asked about, a natural timing trigger]. Still worth a conversation?

[Your name]

The specific reason is what separates a re-engagement from a lazy bump. If you do not have a genuine reason, wait until you do. "Just wanted to check in" on a deal that went cold three months ago rarely produces a response worth having.

8. The Breakup Email

When to send: after 3 to 4 unanswered touches, typically around day 21 to 30.

Subject: Closing this out

Hi [Name],

I have reached out a few times without hearing back. I will assume the timing is not right and will not send any more follow-ups.

If that changes, feel free to reach out. I will keep our previous conversation intact so we can pick up easily.

[Your name]

Counterintuitive result: this template typically generates more replies than any previous touch in the sequence. Something about "I will stop" prompts a response. Keep it clean and free of passive aggression.

9. After a Referral Introduction

When to send: within 24 hours of the introduction.

Subject: Introduction via [Referrer name]

Hi [Name],

[Referrer name] connected us and spoke highly of what you are building at [Company]. I work with similar teams on [specific outcome].

Worth a 20-minute call this week to see if there is a fit? I have [day] or [day] free.

[Your name]

One sentence on the referral. One sentence on what you do. One ask. The referral gives you permission to be direct.

A Simple Follow-Up Cadence

The templates are grouped by situation. Here is how they fit into a timing structure:

Situation Day 2 Day 5 Day 10 Day 21-30
Cold outreach Template 1 Template 2 -- Template 8 (breakup)
Proposal sent Template 3 Template 4 Revised check-in Template 8 (breakup)
Post-demo Template 5 Re: next steps -- Template 8 (breakup)
Referral intro Template 9 Follow-up -- Template 8 (breakup)

Adjust the cadence for your average deal length. If your average deal closes in three weeks, compress it. If it takes six months, spread it out. The structure matters more than the exact days.

What Not to Write

"Just bumping this to the top of your inbox." It signals you have nothing new to say. If you do not have a reason to follow up, you do not have a reason to follow up.

"Following up" as the subject line. This is the subject that never gets opened. Use the original thread subject or something specific to the deal.

Three-paragraph recaps. They received your proposal. They do not need a summary of a summary. The more you write, the less likely they are to reply.

False urgency. "This offer expires on Friday" on a deal where the prospect knows you want to close is transparent. If the urgency is real, explain why. If it is not, leave it out.


Let your inbox tell you who is waiting -- see which of your open deals need a follow-up right now. Start a free 30-day trial. No imports. Setup takes under 2 minutes.


The Real Bottleneck: Knowing Who to Send These To

Here is the gap the templates above cannot fix on their own.

Say you have 40 open threads across Gmail or Outlook. Nine of them are waiting on a reply from you. Three have proposals out for more than 10 days with no response. Two are post-demo threads where the next step was agreed on a call but never confirmed in writing. One is a distributor that used to order monthly and has gone quiet for eight weeks.

Without a system that reads those threads and surfaces the ones that need attention, the cadence table above stays aspirational. You will follow up on the deals you remember. The ones you forget are usually the ones sitting at day 8 with a proposal out and a prospect who is slowly moving toward a competitor.

The follow-up problem in B2B sales is not a template problem. It is a visibility problem. Templates solve the "what do I write" question. The visibility problem is "which of my 40 open deals needs Template 4 today and which need Template 7?"

Briced connects to Gmail or Outlook and builds the pipeline from the actual email threads. It tracks which conversations are waiting on you, which prospects have gone quiet after a proposal, and which deals have had no activity in a week. You can write a plain-English rule: "If a prospect hasn't replied in 5 days after I send a proposal, draft a follow-up email." Briced identifies the threads where that condition is true and drafts the message for you to review. You confirm it and send.

The result is not faster follow-ups. It is follow-ups that actually happen, on the right thread, at the right time, without you keeping a mental list of 40 open deals.

How to automate sales follow-ups without a marketing automation tool covers how deal-aware automation differs from a sequence tool, and when each approach makes sense.

Plain-English sales automations for small B2B teams covers five specific rules worth setting up once you have your follow-up templates ready, including the proposal silence rule and the reorder check-in for existing accounts.

Frequently Asked Questions

How many times should you follow up with a prospect who has not responded?

Three to four times over three to four weeks is the right range for most B2B deals. The breakup email should come around day 21 to 30 at the latest. Following up more than four times into silence signals that the timing is wrong. Stop, record the contact, and reach back out in 90 days with a specific reason. More follow-ups past that point rarely change the outcome and do damage to the relationship.

How long should I wait before following up after sending a quote or proposal?

Two business days. Long enough for them to have read it, not so long that the momentum has dissipated. The first follow-up (Template 3) is a brief check-in to confirm it arrived and offer to answer questions. It is not a push to close. The more assertive follow-up (Template 4) comes at day 7 to 10 if there is still no response.

What do I do when a prospect goes completely silent after showing real interest?

Send Template 7 with a specific reason to reconnect: a result from a similar company, a relevant capability they asked about, or a natural timing trigger like quarter-end. If you do not have a specific reason, wait until you do. A "just checking in" email on a cold prospect rarely produces a useful reply. If Template 7 gets no response, send the breakup email and move the deal to a reactivation list for 90 days out.

Is it okay to send a breakup email?

Yes, and it typically outperforms every previous touch in the sequence. The breakup email (Template 8) signals respect for the prospect's time and inbox. It closes the loop cleanly and often reactivates deals the prospect had on a mental backburner. The key is to keep it short, factual, and free of guilt-tripping language. If you are managing a pipeline with zombie deals that never formally closed, the breakup email is also your best tool for clearing out deals that have been "open" for months with no real activity.

How do I track who needs a follow-up when I have 30 or more open deals?

This is the problem that makes follow-up templates less effective in practice. You can have excellent templates and still lose deals because you did not know which thread to send them to. If your team is working from a spreadsheet or a CRM that depends on manual updates, the gap between "having templates" and "having a system" is where deals die. The best CRM for a small B2B sales team covers what to look for in a tool that tracks follow-up visibility automatically, at different stages of team growth from founder-led to 50 people.

Stop Letting Deals Die in Silence

The templates above are tools. The discipline behind them is knowing whose turn it is to respond and acting before the prospect moves on. Most deal loss in small B2B sales teams is not about price or product fit. It is about silence. A proposal sits. A demo goes unreturned. A re-engagement never happens because nobody flagged that the deal went cold three weeks ago.

Start your free 30-day trial. Connect your Gmail or Outlook inbox in under 2 minutes and see which of your open deals are waiting on a reply right now. No imports. No setup costs. Cancel any time.

Share this article:

Ready to transform your sales workflow?

Let Briced turn your email chaos into closed deals with AI-powered precision.

Start your free trial